Typical heat pipe is composed of shell, suck liquid core and end cover, after pulling the tube into a negative pressure filling with just the right amount of working fluid, make the pipe close to the wall of capillary suction liquid core to be sealed after filled with liquid in porous materials.
One end of the tube for evaporation (heating), on the other side of condenser (cooling), when one end of the heat pipe heat absorption liquid evaporation vaporization of the liquid core, steam under tiny differential pressure gives off heat flow to the other end condense into liquid, liquid along the porous material by the effect of capillary force flow back to the evaporator.
So not himself, and the heat from one end of the heat pipe to the other side.
1. Compared with the same volume profiles radiator cooling capacity increase of 30% - 30%, thermal efficiency is high, the product output per unit area is big, product cost-effective;
2. Heat pipe cooling technique, advanced production technology mature, no special materials, product stable performance, high reliability;
3. The principle of heat pipe radiator phase change process depend on the material nature, without external power, so the system is easy, the water cooling and surface cooling system without forced circulation system, and even heat exchange system, application field more widely;
4. Product maintenance is equal to profile radiator, simple maintenance, reduce the cost later.
